Sand & Cement Screed Contractors
Traditional screeds built for strength, durability, and a perfect finish.
Sand and cement screed has been the industry standard for decades. It’s durable, versatile, and ideal for residential, commercial, and industrial projects where strength and reliability matter.
Sand and cement screed is a proven option for domestic, builder-led and commercial projects where a durable, practical floor build-up is needed. We help with screed type, depth, drying guidance and the details needed to move from enquiry to installation.
Who It Is For
Sand and cement screed is suitable for domestic renovations, extensions, new builds, builder-led projects and commercial floors where a durable, practical screed is required.
Typical Depth
Typical depths vary depending on the floor build-up, insulation, substrate and whether the screed is bonded, unbonded or floating. Many traditional screeds are commonly specified around 50mm to 75mm, but the correct depth should be confirmed for the project.
When To Use It
Use sand and cement screed when you need a traditional screed that can be laid to falls, used across varied floor areas and specified for a wide range of floor finishes.
Drying Guidance
Drying time depends on depth, ventilation, temperature and site conditions. As a rough guide, traditional screeds are often estimated at around 1mm per day up to 40mm, then longer beyond that. Moisture should always be checked before floor finishes are installed.
Suitable For
Sand and cement screed is a practical choice across domestic, builder-led and commercial projects.
Homes & Extensions
For renovations, extensions and new floor build-ups.
Builders & Contractors
For site teams needing practical screed guidance.
Commercial Fit-Outs
For offices, retail units and commercial spaces.
Retail & Office Projects
For durable floors before final finishes go down.
Refurbishments
For updating existing spaces with a level floor base.
Not sure if sand and cement screed is right for the project? Send the details and we’ll advise on the most suitable option.
Our Process
1 / Site Preparation
Subfloor cleaned and insulation layers checked.
2 / Mix
Sand and cement mixed to the correct ratio on site.
3 / Application
Screed applied by pump, compacted, and ruled off.
4 / Finishing
Surface smoothed and levelled to SR1–SR3 tolerances.
5 / Curing
Screed left to cure correctly for maximum durability.
Commercial Unit, Birmingham
In 2024, we installed 600m² of traditional sand and cement screed for a retail refit in Birmingham. The client required a durable base to take heavy daily foot traffic, with minimal disruption to store operations.
Our team completed the pour and finish in just two days, delivering a perfectly level, BS 8204-compliant floor ready for tile installation.
Why Choose Screeding.com
FAQ'S
How long does sand and cement screed take to dry?
It usually dries at around 1mm per day, but this can vary depending on thickness, site temperature, and ventilation. We’ll confirm drying times once we review your project details.
Is sand and cement screed stronger than liquid screed?
Potentially. Traditional screeds are often better suited for heavy-duty or load-bearing applications, while liquid screeds are ideal for speed and underfloor heating. We’ll recommend the best option after assessing your site.
What thickness should sand and cement screed be laid to?
Typically between 25mm and 100mm, depending on the application. The required depth will be confirmed after we review your plans and specifications.
Do you work nationwide?
Yes. Our teams cover 48 counties across the UK, from small residential jobs to large commercial projects.
Will my project need reinforcement (fibres or mesh)?
Potentially. Some floors may require reinforcement to handle higher loads or prevent cracking. We’ll advise on this after reviewing your project details.
Get to Know Us
Fast, flawless, nationwide service with 30+ years of proven experience.